Or drivers to install Windows, then do not.
Norton AntiVirus is installed, then boot up into Windows again, it is not already. Problems like this are quite common. May be due to home computer users. Most commonly used illegal sales department with IT Sometime in the process of producing non-standard CD, it copies some files were missing. Especially as the CD-ROM discs. Included are dozens of such programs. Quite a lot. When users buy and install a program such as Norton AntiVirus or something like that will get the system files with the extension DLL when it is installed it will not be complete. Windows can not access them.
Another reason for the driver because of it. Some drivers have a problem with your operating system and tampering with files. A Windows system crash has seen it. For guidance on how to solve problems. The computer technician. Behavior, ask the user first. If you already have installed. Or drivers to boot into Windows, then it is not anymore. Presumed to be caused by the software and drivers are not perfect and may make the system will not boot. We can solve the problem as follows.
To boot into Safe Mode, because entering Safe Mode to access Windows without. Need some drivers or files. Then, we can remove the program or driver that caused the problem to be flushed out of the machine do the rest of the carcass. Then boot into Windows normally. I can not boot up Windows.
When the computer has passed the POST, but to hold the Windows logo screen and can not boot into Windows at all. Sometimes it does not display the Windows logo, but the message was that "Missing Operation System".
Solutions for the computer technician is. Ask the user before usage. I have to delete some system files to it. Most of the problems it caused COMMAND.COM system files are corrupted or deleted because the file COMMAND.COM file that has the duty to keep order within the system such as DOS TYPE, COPY, DIR, DEL addition to do. Interface and command interpreter the user through the keyboard. The command to work. COMMAND.COM file, which is critical to the operating system is still based on DOS system is great.
How to fix it. To boot with a Startup Disk, then type the command SYS C:, the command Copy files to drive C: by the file system will be included in the COMMAND.COM file, then boot up again, this time to find that I can boot into Windows. Error message 1: This program has performed anillegal operation and will be shut down. If the problem persists, contact the program vendor.
This message indicates that some of the problems we have to sit out the last time that the program is the program's installation. Then removed by Add / Remove Program in Control Panel, then reinstall it. It is recommended that the program used to install a new plate. If you use the old may be the same again. Sometimes the program files after you have installed the program files installed earlier. Once installed, it may have been the same should be resolved by updating to the new version. Error messages 2: Improper shut down detected, Checking disk for errore.
This message indicates that errors encountered in the process of shutting down. May be due to improper shutdown. The system is shutting down. Solution is to wait, then press the Esc key, it will be back to normal, so if you do not want this happening again. Next time, it should shut down the computer properly with the shut down beforehand. Error message 3: Warning Windows has detected a Registry / configuration error. Choose Safe mode to start Windows with minimal set of drivers.
This message indicates that an error in the Windows registry. The Windows operating system into Safe mode will allow us to solve the problem. For solving this problem is quite a serious and very risky. Because the registry is a database that stores information and settings of your computer. If there are problems in this section. Must be corrected carefully. Otherwise it may cause the system to crash. To solve that problem by installing a new system to the new registry file to overwrite the old registry. Or boot with a boot to command Scanreg / restore to revert to the Windows registry backup stored for 5 days after they give us a date that is not a problem. That's all it takes to solve this problem (this latter method, remember to back up any important data. The first one) it's a missed 4: Explorer has caused an error in Kermel132.dll.
This message indicates that an error in the file system. Kernel132.dll. The user may not be able to get into the Control panel will mainly occur in Windows Me workaround is to restart your computer and then go on.
Safe Mode, then follow the steps below.
1. To search for files with the extension *. cpl, go find the program, Search, For Files Or Folders.
2. When you find a file. Cpl is located in the WINDOWS \ SYSTEM. Change the file extension. Old individually and then take a test to see whether or not the Control panel. No, go back to change into another. Until it succeeds. When successful, then we can know that the files would cause problems.
3. To change the extension to all files is the same. Except that a cause Then boot up. Error message 5: The selected disk drive is not in use. Check to make sure a disk is inserted.
This message indicates that the disk drive can not be used. Please make sure that the disc is inserted into the disk drive. For this problem may be caused by the user forgets to insert the disc into the disc drive, but if you put the disc into the disc, this problem may be caused by defective disk drive has a problem. We can not use a test disc to another machine if available. It shows that the disk drive must not be repaired or replaced, it will be able to solve this problem. Error message 6: There is not enough free memory to run this program. Quit one or more programs, and try again.
This message indicates that memory is left in the system is not sufficient to launch the program. The program then try again. For the cause of the problem is that the machine's memory, or RAM is not enough. A permanent solution (but not cost) is to allow users to purchase and install additional RAM. Or is a temporary solution. We encourage users to shut down some unnecessary programs. The program running in the background where we did not turn up for work. Notice from the System Tray, the icon of the program is to ensure the deal is closed out, or programs that consume RAM (Resource Leak) which program they will close it, it still does not release memory over this. into the system. We can check that the system we have. How much resources by right-clicking My Computer and then click the Performance tab of the System Resource to online resources that a few percent. If less than half to close the program and then reboot into the new program, they will return to the same RAM. Error message 7: Error Reading CD-ROM in Drive D: (or drive to a CD-ROM) Please insert CD-ROM XX With Serial Number XX in Drive d: ... if the CD-ROM is still the drive,. it may require cleaning.
This error message will come up as an error reading from the CD in the drive D: (or drive to a CD-ROM), which caused the user to press the Eject button for CD release. before the window. I read it. How to fix it. Take the same place to wait for Windows to read data from the disc, then remove it. The observation of light on the CD-ROM drive. Should wait for the lights stop flashing before. Sometimes the cause is probably due to the use of the CD that has not already been put into use. The CD is dirty or the CD drive. Unable to read data. Should come out clean before putting back on again. Error message 8:-0x0000007B INACCESSIBLE_BOOT_DEVICE.
This error message is prompted by the error code number indicates an error. This means that the computer can not find the partition. To be the boot partition or boot sector is a problem. Let us solve the problem by trying to boot the system again. If it still does not boot up, the Startup disk, rather then using Scandisk to repair.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น