Blue Screen problems and solutions.
The Blue Screen Play here is as good as anyone I do not want to be with her because if there are signs that the computer they started no problem, but the aching is not a number. the code that you need because I do not know what it means. And the remedies, however. I read that each mean. I try to make you think you have a way to solve the problem of Blue Screen code that I really have more than a hundred. It will only occur frequently in the survey (the site was outside).
I started it.
1. (Stop code 0X000000BE) Attempted Write To Readonly Memory.
Causes and solutions:.
This pain is caused by a driver or a program or service is not bad as some files. Different versions of the driver to uninstall the program before you have this problem. If a driver is to roll back the driver is used to find the latest drivers. (If there are more) is a service that we turn first to the problem, please turn off or disable it.
2. (Stop code 0X000000C2) Bad Pool Caller.
Causes and solutions:.
This is similar to the above. But they stressed that the hardware is up to the Hardware and software upgrade, such as ram, harddisk cards are not compatible with XP, the solution is to upgrade the equipment that's out. If required, the driver or the firmware of the device's software, the new date. And warnings for the Afghans to date, turn off anti-virus as it will interfere with my anti-virus program because it is perceived as viruses.
3. (Stop code 0X0000002E) Data Bus Error.
Causes and solutions:.
This pain is caused by the BUS data of damage, including hardware, system RAM, Cache L2 of CPU, memory cards, monitors, hard work and the error (too hot) and the motherboard.
4. (Stop code 0X000000D1) Driver IRQL Not Less Or Equal.
Causes and solutions:.
Drivers with symptoms. IRQ (Interrupt Request) is not synchronized to the same error on that one.
Five. (Stop code 0X0000009F) Driver Power State Failure.
Causes and solutions:.
This pain is caused. System power management driver or service conflicts on your computer to run the "Hibernate" solution if Windows prompts error driver or service that you have to uninstall them or the way Rollback driver or disable power management. Windows now.
6. (Stop code 0X000000CE) Driver Unloaded Without Cancelling Pending Operations.
Causes and solutions:.
But when the driver turns off. I have not Windows. Corrections to the Article 1.
7. (Stop code 0X000000F2) Hardware Interrupt Storm.
Causes and Solutions: The symptoms are caused by hardware devices such as USB or SCSI controller is positioned on the wrong IRQ the driver or the like on a Firmware revision.
8. (Stop code 0X0000007B) Inaccessible Boot Device.
Causes and solutions:.
This pain is often not the boot drive. A message that can not read data files for the tools and Boot partitions, verify that the hard drive or not. Cable or power off the hard drive or not. If it is normal to the Boot.ini file may be damaged or not working with Multi OS, make sure that this file may be a conflict of OS Config.
Other cases, the error is that the upgrade window caused by a device is not Compatible, try out the equipment you need, or think there are issues out on the upgrade, Windows will not remove a device that is inserted and then install it. drive. The latest version now.
Nine. (Stop code 0X0000007A) Kernel Data Inpage Error.
Causes and solutions:.
This may cause problems with the Windows virtual memory system can not read or write data to the swapfile can be caused by the hard disk bad sector, computer viruses, system error, SCSI, RAM or motherboard is bad.
10. (Stop code 0X00000077) Kernel Stack Inpage Error.
Causes and solutions:.
And cause symptoms similar to Article 9.
11. (Stop code 0X0000001E) Kmode Exception Not Handled.
Causes and solutions:.
This is due to a faulty driver or service to the memory and IRQ if there is a list of file or service displayed on this error, please uninstall the program or the Roll back the driver.
If the error that caused the file win32k the control software of other companies. (Third-party) that do not use Windows. This happens most frequently with the Wireless Networking and mostly
Error may be another cause that is to run programs but not enough memory.
12. (Stop code 0X00000079) Mismatched Hal.
Causes and solutions:.
This may cause malfunction of the Hardware Abstraction Layer (HAL) to understand the HAL before HAL has served as an interface between hardware and software systems. Software that Apple applications that I run on the device is considered in the example you have software that is designed for use with the Dual CPU to the motherboard with a Single CPU window, it will not. the solution is to reinstall Windows new
Another reason is the file name or NToskrnl.exe Hal.dll expire or corrected take Backup the original file or files that are lost or copied over the latest attempt at a world forum.
13. (Stop code 0X0000003F) No More System PTEs.
Causes and solutions:.
This is due to a system Page Table Entries (PTEs) by Virtual Memory Manager (VMM) runs without error, the Windows PTEs, which is essential for Windows. This usually happens when you work with multi monitors.
If you experience this problem frequently. You can customize the new PTEs.
A. To open the Registry Editor by going to Start> Run command and type Regedit.
Two. To this key HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSe ssion ManagerMemory Management.
Three. To look at the window right off the PagedPoolSize. To set the Value data to 0 and click OK.
4. Double-click SystemPages If you use a Multi Monitor screen, enter the Value data to 36000 or 40000 if you have the RAM.
128 MB and 110 000 in case the machine has more than 128 MB RAM, and then click OK to restart.
14. (Stop code 0X00000024) NTFS File System.
Causes and solutions:.
This pain is caused by reporting errors Ntfs.sys is read and write NTFS driver error. TSST included. Malfunction of the controller of IDE or SCSI because the virus or the hard drive. You can get details of the error. This can open the Event Viewer to open it, go to start> run and type eventvwr.msc to open the Log file of the error to see the error in the SCSI or FASTFAT Autochk in the System or Application.
15. (Stop code 0X00000050) Page Fault In Nonpaged Area.
Causes and solutions:.
This pain is caused by a fault in the battery cabinet to fix it, clean it or try to camp overnight or attempt. I went to check the RAM memory test program that is broken or not.
16. (Stop code 0Xc0000221) Status Image Checksum Mismatch.
Causes and solutions:.
This pain is caused by damage to the driver with a swapfile. Editing is like, 15.
17. (Stop code 0X000000EA) Thread Stuck In Device Driver.
Causes and solutions:.
Symptoms of this error is that the machine runs in the first iteration. It is not the end. Restore the North as well. Or error. Anything that does not cause this problem may be caused by the Bug of the program or the other as an editor to do this.
A., See Power supply to a power sufficient to meet the needs of the computer or not, see if the machine you have to do with Power supply for you to change and new that is good. more I've experienced this problem and then 2 times.
-1.1 For the first time experience. The second machine. (I have my current machine for Mounting on 2 Notebook) in my main specification.
CPU: AMD Barton 2500 (210 * 11 = 2310).
M / B: Abit A7N.
Ram: 1G Dual Kington.
Powersupply: Enamax 465P-VE.
The decor of my room. The first machine from a program or game that's hard to get it for free from one day to cause this error to try to solve the problem. It's not just that. I happen to come across your email http://www.unlimitpc.com/modules.php?name=Artical&pa=showpage&pid=19 UnlimitPC Aee of it they look at the Bios, it is true that you are not Aee. delay and that you will not have a lot of Aee taught me to have you here with me at Aee.
-1.2, The second experience. The first machine with a specification.
CPU: AMD T-Bred 1700 (166 * 11 = 1826) (Over clock in the brain).
M / B: Soltek 75FRN2-RL.
Ram: 512MB Dual Geil.
Powersupply: Enamax 351P-VE.
And equipment must not look the same. , It is always available, no problem, I get an error like this one I did not understand it so when the machine and check the Bios, it is like to manage change like that, then the juice is not as much. Sit on the full day. All machines come with removable parts. The problem I have is that the Capacitor motherboard CPU power Kigeklืa island filled with tumor.
A long story is to experience it to know for the UPS may be a problem as I have a solution.
Two. Make sure you look at the video card driver update. Are you sure that you also have to update it to Rollback the driver prior to the issue.
Three. Check card and the motherboard is bad or not, burns, broken circuit with some parts broken away from its original location, etc.
Four. Look at the Bios that the mode of the VGA slot 4x, 8x is the specification of the card or not.
Five. Check the motherboard that has produced a new driver or interference with the new version of it.
6. If you have a network card or your motherboard has on board is to disable the function "PXE Resume / Remote Wake Up" by going off the BIOS.
18. (Stop code 0X0000007F) unexpected Kernel Mode Trap.
Causes and solutions:.
These symptoms are most common with Overclock (but one) to send data to the CPU or RAM, not the CPU is running too fast. Overclock the temperature of the solution is to reduce the clock down to a normal or heat from the CPU as much as possible.
19th. (Stop code 0X000000ED) Unmountable Boot Volume.
Symptoms, causes and solutions for hard disk drive not found. (Not the boot) If you have multiple hard drives. Once in, you can use it as a hard disk drive cable is 40 pin ribbon cable 33MB/secound which requires you to remove the 80 pin instead.
